Netum NT-1228BL Setup Manual page 6

3).By scanning the following barcode, all data entries in the buffer memory can be manually uploaded after
reconnecting to the working station (only in offline mode).
Uploading the Data
4). By scanning the following barcode, the gross quantity of the uploaded data entries will be summarised
(only in offline mode).
Summarising of uploaded data entry quantity
5). By scanning the following barcode, the device leaves the offline mode, instant uploading mode will be
activated. (By default)
Instant uploading mode
Notes: Command barcodes from Working mode section are only applied for Bluetooth wireless mode,
Terminator
The scanner provides a shortcut for setting the terminating character suffix to CR or CRLF and enabling it by
scanning the appropriate barcode below.
None CR&LF *
CR TAB
Idle Time
Scanner will stay awake during the idle time that you set for it and turn to sleep if you haven't used it during
the whole idle time.