08/2005
5
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
5.1 Straight or circular path movements
Choose one of the machining planes (Rotate,
End face/End face C, Peripheral surface/Peripheral surface C,
End face Y or Peripheral surface Y).
Enter the cylinder diameter if you selected the machining plane
Peripheral surface/Peripheral surface C.
-or-
Enter the positioning angle for the CP machining area if you
selected machining plane End face Y.
-or-
Enter reference point C0 if you selected the machining plane
Peripheral surface Y.
Choose whether the spindle should be clamped or released or
whether there should be no change (input field left blank).
Press the "Accept" softkey.
The values are saved and the parameterization screen form is closed.
The process plan is displayed and the newly created program block is
marked.
ShopTurn Functions
5
5-157