Configuring Routing Between Pes; Configuring Bgp Vpnv6 Route Control - HP MSR2000 Configuration Manual

Configuring routing between PEs

Step
1. Enter system view.
2. Enter BGP view.
3. Configure the remote PE as the
peer.
4. Specify the source interface for
route update packets sent to
the specified peer.
5. Create
address family and enter its
view.
6. Enable BGP VPNv6 route
exchange with the specified
peer.

Configuring BGP VPNv6 route control

BGP VPNv6 route control is configured similarly with BGP route control, except that it is configured in
BGP VPNv6 address family view. For detailed information about BGP route control, see Layer 3—IP
Routing Configuration Guide.
To configure BGP VPNv6 route control:
Step
1. Enter system view.
2. Enter BGP view.
3. Enter BGP VPNv6 address
family view.
(Optional.) Configure filtering
4.
of advertised routes.
5. (Optional.) Configure filtering
of received routes.
6. Configure
filtering for the specified peer
or peer group.
7. Configure IPv6 prefix list-based
route filtering for the specified
peer or peer group.
8. Specify a preferred value for
routes received from the peer
or peer group.
Command
system-view
bgp as-number
peer { group-name |
ipv6-address } as-number
as-number
peer { group-name | ip-address }
connect-interface interface-type
interface-number
the BGP VPNv6
address-family vpnv6
peer { group-name | ip-address }
enable
Command
system-view
bgp as-number
address-family vpnv6
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
export [ protocol process-id ]
filter-policy { acl6-number |
prefix-list ipv6-prefix-name }
import
ACL-based route
peer { group-name | ip-address }
filter-policy acl6-number { export |
import }
peer { group-name | ip-address }
prefix-list ipv6-prefix-name
{ export | import }
peer { group-name | ip-address }
preferred-value value
313
Remarks
N/A
N/A
By default, no BGP peer is
configured.
By default, BGP uses the outbound
interface of the best route to the
BGP peer as the source interface.
By default, the BGP VPNv6
address family is not created.
By default, BGP does not exchange
BGP VPNv6 routes with any peer.
Remarks
N/A
N/A
N/A
By default, the PE does not filter
advertised routes.
By default, the PE does not filter
received routes.
By default, no ACL-based route
filtering is configured.
By default, no IPv6 prefix list-based
route filtering is configured.
The default preferred value is 0.