Front Panel Layout - GE MDS SD4 Series Startup Manual

INTRODUCTION
This guide presents basic installation and operating instructions for the
MDS SD4 Series wireless transceiver. It is a companion guide to the
MDS SD4 Series Reference Manual (Part No. 05-4670A01). Refer to
the Reference Manual for additional details and system design infor-
mation.
The transceiver
point environments, including utility automation/distribution systems,
and other telemetry functions.
These radios are software-configurable to provide flexible operation
in a variety of applications using one hardware platform. They employ
microprocessor control and Digital Signal Processing (DSP) tech-
nology to provide robust communications even under adverse condi-
tions.
The transceiver is designed for trouble-free operation with data equip-
ment provided by other manufacturers, including remote terminal
units (RTUs), programmable logic controllers (PLCs), flow com-
puters, transaction terminals, and other similar devices.
Some features may not be available on all units, based on the
NOTE:
options purchased and the applicable regulatory constraints
for the region in which the radio will operate.

Front Panel Layout

Figure 2 shows the interface connectors and indicators on the trans-
ceiver's front panel. These items are referenced in the installation
steps given later in this guide.
05-4669A01, Rev. A
(Figure 1) is designed to operate in point-to-multi-
Figure 1. SD4 Data Transceiver
MDS SD4 Startup Guide
1