1-2. Opening, closing and locking the doors
The power back door can be opened/closed when
■
Vehicles with smart key system
The "ENGINE START STOP" switch is in IGNITION ON mode, and
●
the shift lever is in "P".
The "ENGINE START STOP" switch is in OFF or ACCESSORY
●
mode.
Vehicles without smart key system
The engine switch is in the "ON" position, and the shift lever is in "P".
●
The engine switch is in the "LOCK" or "ACC" position.
●
Jam protection function (vehicles with power back door)
■
If anything obstructs the power back door while it is closing/opening, the
back door will automatically operate in the opposite direction.
If the power back door does not work
■
The back door must be initialized. To initialize, close the back door com-
pletely by hand.
Back door closer
■
In the event that the back door is left slightly open, the back door closer will
automatically close it to the fully closed position.
62