Toshiba AJ65VBTCU-68ADVN User Manual page 32

3 SPECIFICATION
Table 3.5 Remote I/O Signal List for Ver. 2 Remote Device Station
Signal direction: AJ65VBTCU-68ADVN/ADIN
Remote input (RX)
RXn0
RXn1
RXn2
RXn3
RXn4
RXn5
RXn6
RXn7
RXn8
to
RXnB
RXnC
RXnD
to
RX(n+1)7
RX(n+1)8
RX(n+1)9
RX(n+1)A
RX(n+1)B
RX(n+1)C
to
RX(n+3)F
3 - 12
(2) Remote I/O signal list for ver. 2 remote device station (ver. 2
compatible slave station) setting
Table 3.5 indicates the assignment and names of the remote I/O signals for ver.
2 remote device station (ver. 2 compatible slave station) setting.
(Ver. 2 Compatible Slave Station) Setting
Master Module
Signal name
CH.1 A/D conversion completion flag
CH.2 A/D conversion completion flag
CH.3 A/D conversion completion flag
CH.4 A/D conversion completion flag
CH.5 A/D conversion completion flag
CH.6 A/D conversion completion flag
CH.7 A/D conversion completion flag
CH.8 A/D conversion completion flag
Reserved
2
E PROM write error flag
Reserved
Initial data processing request flag
Initial data setting completion flag
Error status flag
Remote READY
Reserved
POINT
The reserved devices given in Table 3.5 are used by the system and cannot be
used by the user.
If the user has used (turned on/off) any of them, we cannot guarantee the functions
of the AJ65VBTCU-68ADVN/ADIN.
Signal direction: Master Module
Remote output (RY)
RYn0
to
RY(n+1)7
RY(n+1)8 Initial data processing completion flag
RY(n+1)9
RY(n+1)A
RY(n+1)8
to
RY(n+3)F
MELSEC-A
AJ65VBTCU-68ADVN/ADIN
Signal name
Reserved
Initial data setting request flag
Error reset request flag
Reserved
3 - 12