Table of Contents
Advertisement
3 SPECIFICATION
3.2 Performance Specification
Item
Protection class
Voltage
Analog input
Current
Digital output
3
I/O characteristics, maximum
resolution, accuracy (accuracy
relative to maximum value of
digital output value)
Maximum conversion speed
Absolute maximum input
Analog input points
CC-Link station type
Number of occupied stations
Communication cable
Isolation specifications
Noise durability
External wiring system
One-touch connector
for communication
Applicable
One-touch connector
wire size
for power supply/FG
One-touch connector
for analog I/O
Applicable DIN rail
External power supply
Weight
3 - 2
Table 3.2 indicates the performance specifications of the AJ65VBTCU-68ADVN/ADIN.
Table 3.2 Performance specification
AJ65VBTCU-68ADVN
–10 to 0 to +10V DC (input resistance 1M )
⎯
16-bit signed binary (-4096 to +4095)
Analog input range
-10 to +10V
User range setting 1
(-10 to +10V)
AJ65VBTCU-
0 to 5V
68ADVN
1 to 5V
(Voltage)
User range setting 2
(0 to 5V)
0 to 20mA
AJ65VBTCU-
4 to 20mA
68ADIN
User range setting
(Current)
(0 to 20mA)
Voltage ±15 V
Remote device station (ver. 1 remote device station or ver. 2 remote device station)
Ver. 1 remote device station (ver. 1 compatible slave station) setting:
Ver. 2 remote device station (ver. 2 compatible slave station) setting:
Ver. 1.10 compatible CC-Link dedicated cable: FANC-110SBH, FA-CBL200PSBH, CS-110
Specific isolated area
Across communication system terminals
and all analog input terminals
Across power supply system terminals
and all analog input terminals
Between channels
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to 60Hz noise frequency
One-touch connector for communication [Transmission circuit]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for power supply and FG [Unit power supply and FG]
(5 pins pressure welding type, the plug for the connector is sold separately)
One-touch connector for analog I/O
(4 pins pressure welding type, the plug for the connector is sold separately)
<Sold separately>
Online connector for communication: A6CON-LJ5P
Online connector for power supply: A6CON-PWJ5P
Communication line: Ver. 1.10 compatible CC-Link dedicated cable
2
0.5mm
(AWG#20) [ 2.2 to 3.0], shielded wire 0.5mm
1.0 to 1.4 (A6CON-P214), 1.4 to 2.0 (A6CON-P220) [Applicable cable size: 0.14 to 0.2 mm
1.0 to 1.4 (A6CON-P514), 1.4 to 2.0 (A6CON-P520) [Applicable cable size: 0.3 to 0.5 mm
TH35-7.5Fe, TH35-7.5Al (conforming to JIS C 2812)
CC-Link connector type metal installation fitting: A6PLT-J65V1
24V DC (20.4V to 26.4V DC, ripple factor within 5%)
IP1XB
0 to 20mA DC (input resistance 250 )
16-bit signed binary (-96 to +4095)
Digital output
temperature
-4000 to +4000
0 to 4000
(±12 digit )
0 to 4000
1ms/channel
8 channels/module
3 stations
1 station (Expanded cyclic setting: Quadruple)
Isolation
method
withstand voltage
Photocoupler
isolation
Transformer
isolation
Not isolated
2
0.66 to 0.98 mm
(AWG#18) [ 2.2 to 3.0]
Wire diameter 0.16 mm or more
Inrush current: 4.2A, within 1.2ms
Current consumption 0.10A
0.17kg
MELSEC-A
AJ65VBTCU-68ADIN
⎯
Accuracy
Max.
Ambient
Ambient
Resolution
temperature
0 to 55°C
25±5°C
2.5mV
1.25mV
±0.3%
±0.2%
1.0mV
(±8 digit )
5µA
4µA
: digit indicates digital value.
current ±30mA
Dielectric
Insulation resistance
5M
or higher,
500V AC for 1
measured with 500V
minute
DC insulation
resistance tester
-
-
2
(AWG#20)
3 - 2
2
]
2
]
Advertisement
Table of Contents
