Table of Contents
Advertisement
Praesideo 3.5 | Installation and User Instructions | 6 | Installation Accessories
30 Click the front housing on the mounting block/back
housing assembly (see figure 29.35).
figure 29.35: Installing the front housing
31 Insert the Torx screw into the front housing (see
figure 29.36).
figure 29.36: Inserting the Torx screw
Bosch Security Systems | 2011-02
32 Tighten the Torx screw using the Torx screwdriver
(tool 7, see figure 29.37)
figure 29.37: Tightening the Torx screw
33 Put the dust cap on the connector to protect the
plastic optical fibers (see figure 29.38).
figure 29.38: Dust cap on connector
en | 291
Advertisement
Table of Contents
