Toshiba e-STUDIO163 Service Manual page 201

(5) Remove 1 clip and 1 bushing.
(6) Take off the exit roller by sliding it to the rear
side.
[D] Exit sensor (S5)
(1) Take off the fuser/paper exit unit.
P.13-11 "[A] Fuser/Paper exit unit"
(2) Remove the spring with the upper side of its
hook from the guide.
(3) Open the guide and slide it to the front side.
Then slide its rear hinge downward.
Note:
Keep the guide being slid to the front side
during the steps (3) and (4).
December 2005 © TOSHIBA TEC
Exit roller
Fig. 13-11
Fig. 13-12
Fig. 13-13
13 - 13
Clip
Bushing
Spring
1
2
Guide
e-STUDIO163/203 FUSER / EXIT UNIT
13