Toshiba strata DK8 Installation Instructions Manual page 320

PROGRAMMING PROCEDURES-INSTRUCTIONS/SYSTEM RECORDS
SECTION 100-816-302
MARCH 1993
PROGRAM 36
FIXED CALL FORWARD
-I- -II-
SELECT = Logical Port Number (00-19) FORWARD TEL = Port Number (00-19)
Enter the port number of the Enter the port number of
station that needs a Fixed the station or VM port that
Call Forward location
will be call forwarded to
assigned. See Note 3 for when the Fixed Call Forward
a range of ports.
button is pressed.
NOTE: Shaded areas apply to DK16 only
L;t;' 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
Forward
Tel
NOTES:
1. For more information, see the instructions preceding the record sheets.
2. Initialized data does not assign a Fixed Call Forward location to any port.
3. To enter a range of ports, key in the following sequence:
q O~OU
Low POT L,,, port
4. Press Button/LED 01 to enter blanks.
5. See Program 39, Code 86, to assign Fixed Call Forward buttons on DKTs/EKTs.
6. Fixed Call Forward will forward all calls to the designated port.
7. Stations that have Fixed Call Forward set will not ring.
8. Program 92-9 does not clear Fixed Call Forward memory.
2-72