Optipoint 410 And Optipoint 420 Add-On Devices; Optipoint Slk Module; Figure 10-29 Optipoint Slk Module - Siemens HiPath 3000 Service Manual

Hide thumbs Also See for HiPath 3000:

Table of Contents

Workpoint Clients

IP Telephony (Voice over IP)

optiPoint 410 and optiPoint 420 Add-On Devices

Always disconnect the line cord before connecting add-on devices to the telephone.

The user usually installs the add-on devices. The installation instructions are on the "Electronic

Operating Instructions" CD.

A maximum of two add-on devices may be installed on an optiPoint 410 or optiPoint

420 telephone (not optiPoint 410 entry, optiPoint 410 economy optiPoint 420 econo-

my and optiPoint 420 economy plus).

optiPoint Key Module and optiPoint BLF can be used in addition to the two add-on

devices described below. Table 10-6 shows the possible add-on device configura-

The optiPoint SLK module is an add-on device that should be mounted on the side of the tele-

phone; it provides an additional 13 keys, LEDs, and displays for all purposes. SLK (self-labeling

key) means that each key is assigned a display (1 line with 12 characters) in which the function

or call number currently saved is shown.

Figure 10-29

optiPoint SLK Module

Double assignment can be performed for the keys if only call numbers without LED support are

saved on the first level. It is also possible to program call numbers without LED support on the

second level. These can be internal station numbers, DID call numbers and call numbers from

a HiPath network.

P31003-H3550-S403-4-7620, 02/05

HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual

Table of Contents