Suzuki GRAND VITARA XL-7 Owner's Manual page 394

1
2
1
(a)
2) Install CMP sensor to camshaft.
Fit the dog of CMP sensor coupling into the slots of cam-
shaft, when installing. The dogs of CMP sensor coupling are
offset. Therefore, if the dogs can not be fitted into the slots,
turn the CMP sensor shaft by 180 degree and try again.
1. CMP sensor
2. CMP sensor coupling
3. Camshaft
A : Slot offset
3) Tighten CMP sensor bolt (3).
2
Tightening torque
CMP sensor bolt (a) : 15 N·m (1.5 kg-m, 11.0 lb-ft)
4) Connect CMP sensor coupler (2) to CMP sensor (1).
3, (a)
5) Install A/T fluid level gauge and filler tube.
Tightening torque
A/T filler tube bolt (a) : 85 N·m (8.5 kg-m, 61.5 lb-ft)
IGNITION SYSTEM (FOR H27 ENGINE) 6F2-11