Display Spindles; Display Help Functions - Siemens SINUMERIK 840D Operator's Manual

4
Machine Operating Area
4.2 General functions and displays

4.2.5 Display spindles

Spindle
or

4.2.6 Display help functions

4-78
Function
The current spindle values (actual speed, setpoint speed, position on
oriented spindle stop and spindle override) can be displayed.
Operating sequence
"AUTO"/"MDA"/"Jog" mode is selected in the "Machine" operating
area.
The "Spindle" window appears on the screen.
The window contains the spindle setpoint and actual value, position,
setting of spindle override switch and spindle output.
The spindle load for 2 analog spindles in total can be displayed in the
window.
Using the "Page" keys you can scroll up and down to display other
spindles if any are configured.
Further information
•
The "Spindle" window is displayed only if at least one spindle is
configured.
•
If a master spindle "S1" is configured, this is automatically
displayed in the spindle window, even if it is not the first spindle.
Function
Auxiliary functions active in the selected channel can be displayed.
Operating sequence
"Auto"/"MDA"/"Jog" mode is selected in the "Machine" operating area.
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
4
03.04
 Siemens AG, 2004. All rights reserved