Reading Out Plc Alarm Texts And Cycle Texts; Outputting Error/Transmission Log - Siemens SINUMERIK 840D Operator's Manual

7
03.04
7.5.5

Reading out PLC alarm texts and cycle texts

Data out
7.5.6

Outputting error/transmission log

Transmission messages
"OK"
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/810D Operator's Guide HMI Embedded (BEM) – 03.04 Edition
Function
PLC alarm texts, cycle texts and cycle alarm texts can be read out.
Operating sequence
The "Data out" window is opened.
A screen appears where you can select your desired language.
You can choose any of the following texts from "Texts":
•
PLC alarm texts (user)
•
PLC alarm texts (standard)
•
Standard cycles
•
User cycles
•
Manufacturer cycles
•
Cycle alarm texts (user)
•
Cycle alarm texts (standard)
Function
A log listing data that have been imported and exported can be output
in the Services operating area.
The log contains
1. for files to be output
- the file name complete with pathname, and
an error acknowledgment.
-
2. for files to be input
- the file names and the 1st line, which generally contains the
path name ;$PATH=..., and
- an error acknowledgment.
The following messages may appear during transmission:
Transmission has been terminated correctly.
Services Operating Area
7.5 Main services screen
7
7-267