3.8
Vibration severity grade
The 1PH4 motors conform to vibration severity Grade A in accordance with EN 60034-14
(IEC 60034-14).
The values indicated refer only to the motor. These values can be increased at the motor
due to the overall vibration characteristics of the complete system after the drive has been
mounted.
The motors comply with the vibration severity grade up to rated speed n
Figure 3-19
Figure 3-20
3.9
Paint finish
The motors are shipped with the standard paint finish RAL 7016 (anthracite).
1PH4 Induction Motors
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
Vibration severity grades for shaft heights 100 to 132
Permissible vibration rate
Vibration severity grades for shaft height 160
Mechanical properties of the motors
3.8 Vibration severity grade
.
N
59