Power Connection - Siemens SINAMICS S120 Configuration Manual

Connection methods

6.2 Power connection

6.2 Power connection
Connecting motors
Note
The motors can be fed from a DC link voltage of up to 700 V DC.
Table 6- 1 Overview, connection system for 1PH4 motors
SH Number
Main terminals
100 3 x M5
132 3 x M5
160 3 x M10
Carefully observe the current which the motor draws for your particular application!
Adequately dimension the connecting cables according to IEC 60204-1.
Power cable
Figure 6-2
118
Max. cross-section that can be
connected
16 mm
2
35 mm with cable lug
2
connection
70 mm with cable lug
2
connection
CAUTION
Power cable
Terminal strip for PE connection size/
temperature sensor
cable lug width
3 terminals M4/9 mm
3 terminals M5/15 mm
3 terminals M6/15 mm
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
1PH4 Induction Motors