Description of the motors
1.2 Technical features
Table 1- 2
Options
Option
Bearing version (view of DE)
Vibration severity grade
according to EN 60034-14 (IEC 60034-14)
Radial eccentricity, concentricity and axial
eccentricity
according to DIN 42955 (IEC 60072-1)
Shaft end (DE)
Shaft seal (DE)
5)
Holding brake
1)
Terminal box arrangement (view of DE)
Terminal box rotation
Speed
6)
Rating plate (type plate)
Encoder system
1) Options mutually exclude each other.
2) Vibration severity grades S/SR are not achievable for models with built-in gearboxes. Use order code K00 + G97 for old
ZF gearbox 2LG42❑❑❑ (for selecting gearing, see chapter "Gearboxes").
3) Automatically includes version K04.
4) Increased shaft accuracy.
5) Only recommended if oil spray/mist occasionally gets onto the sealing ring.
6) Version for increased maximum speed includes vibration severity grade SR and half-key balancing. The following options
are not possible:
● Prepared for ZF gearbox mounting
● Shaft seal
16
Order code
Description
K00
Single bearing
for coupling
•
for planetary gearbox, e.g. ZF gearbox 2LG43❑❑❑, types
•
IM B35, IM V15
for low to moderate radial forces
•
Grade S with duplex bearing
K05
•
K02
Grade S with single bearing
•
K03
Grade SR with single bearing
•
K04
Tolerance R
Plain shaft
K42
•
L69
Half-key balancing
•
K18
Radial shaft seal, oil-tight, IP65
With holding brake mounted on DE
G46
•
G95
Motor is prepared for a holding brake
•
Right-hand side
K09
•
K10
Left-hand side
•
by 90°, cable entry from drive end
K83
•
K84
by 90°, cable entry from non-drive end
•
K85
by 180°
•
L37
Increased maximum speed and half-key balancing
K31
Second rating plate (type plate), separately packed
H30
Without encoder
Configuration Manual, (APH4S), 08/2008, 6SN1197-0AD64-0BP1
1)
1) 2)
3)
3)
3)
4)
1PH4 Induction Motors