Reconnecting The Smartband 2; Resetting Your Smartband 2 - Sony SmartBand 2 SWR12 User Manual

To set up your SmartBand 2 using Bluetooth®
1
Make sure that your SmartBand 2 is fully charged.
2 Android™ device: Make sure that you have installed or updated the SmartBand
2 application to the latest version.
3
Turn on your SmartBand 2.
4 Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth®
devices and select SWR12 in the list of available devices.
5
Android™ device: Follow the instructions that appear on the screen.
briefly in the status bar and permanently in the Notification panel when a
connection with the SmartBand 2 is active.
You can drag down the status bar to open the Notification panel and get quick access to the
SmartBand 2 application and the Lifelog application.

Reconnecting the SmartBand 2

In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your SmartBand 2 vibrates 3 times if the out-of-range alert
is turned on, and your SmartBand 2 automatically performs a series of reconnection
attempts if Bluetooth® is turned on. In case the auto-reconnection fails, you can use
the power key to manually force the accessory to try reconnecting, or you can use
NFC to reconnect the two devices.
To force the SmartBand 2 to try reconnecting
•
Briefly press the power key.
To reconnect your SmartBand 2 using NFC
1
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your SmartBand 2 so that the NFC detection
area of each device touches the other.
The SmartBand 2 application opens automatically when your SmartBand 2 connects with
your Android™ device using NFC.

Resetting your SmartBand 2

Reset your SmartBand 2 if it behaves unexpectedly or if you want to connect it to a
new device.
To perform a factory reset
1
Turn off your SmartBand 2.
2
Press and hold down the power key for more than 10 seconds.
If you are pairing the SmartBand 2 with a new Android™ device, your SmartBand 2 may
attempt to reconnect with your previous Android™ device even after a factory reset. Unpair
your SmartBand 2 with the previous device first and then pair it with the new Android™
device.
To unpair your SmartBand 2
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 > > Forget SmartBand.
2 Tap OK to confirm.
You can also unpair your SmartBand 2 from the Bluetooth® settings of the Android™ device.
This is an Internet version of this publication. © Print only for private use.
8
appears