Setting Up Your Smartband 2; Preparing To Use Your Smartband 2 - Sony SmartBand 2 SWR12 User Manual

Setting up your SmartBand 2

Preparing to use your SmartBand 2

For your SmartBand 2 to work properly, you must install the latest version of the
SmartBand 2 application on the Android™ device, and then pair and connect it with
your Android™ device. You also need to install the Lifelog application, which adds
extra features and functions that allow you to, for example, see more detailed
information about your daily activities.
You can set up your SmartBand 2 using NFC, which launches the pairing, connection
and setup procedures automatically, or you can use the Bluetooth® option to do the
steps manually.
A setup wizard in the SmartBand 2 application guides you through the process of
setting up your SmartBand 2 for the first time.
All applications required for the SmartBand 2 to work are available on Google Play™.
To set up your SmartBand 2 using NFC
1
Make sure that your SmartBand 2 is fully charged.
2 Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
3
Place the Android™ device over your SmartBand 2 so that the NFC detection
area of each device touches the other, then follow the instructions on the
Android™ device to install the SmartBand 2 application and the Lifelog
application. appears briefly in the status bar and permanently in the
Notification panel when a connection with the SmartBand 2 is active.
When starting your SmartBand 2 for the first time and the SmartBand 2 has not been paired
with a device before, your SmartBand 2 automatically enters pairing mode. If your SmartBand
2 is turned on and has been paired before, it tries to reconnect to the last paired device
instead. Your SmartBand 2 can only be paired to one device at a time.
You can set up your SmartBand 2 using NFC even when the SmartBand 2 is turned off. The
SmartBand 2 turns on when the NFC detection area touches it. If you have problems pairing
your SmartBand 2 with an Android™ device using NFC, try to connect manually using
Bluetooth®. You can drag down the status bar to open the Notification panel and get quick
access to the SmartBand 2 application and the Lifelog application.
This is an Internet version of this publication. © Print only for private use.
7