Chapter 4 Function/System Settings and Display
4.2 Advanced Copy Management > initialize snap-data-volume
initialize snap-data-volume
This command initializes Snap Data Volumes (SDV). Volume types other than snap data volumes cannot be
specified.
■
Syntax
initialize snap-data-volume {-volume-number
■
Parameter
-volume-number
or
-volume-name
■
Example(s)
The following example initializes the consecutive SDVs from #1 through #5:
CLI> initialize snap-data-volume -volume-number 1-5
This parameter specifies the Snap Data Volume (SDV) identifiers to be initialized. One or more
SDVs can be specified at the same time. For details, refer to
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
volume_numbers
| -volume-name
394
volume_names
}
"1.2.9 Volume Syntax" (page
P2X0-1030-09ENZ0
22).