Chapter 3 Configuration Settings and Display
3.2 Flexible Tier Management > show balancing-flexible-tier-pools
show balancing-flexible-tier-pools
This command displays balancing information for the Flexible Tier Pools (FTRPs) that are registered in the
ETERNUS DX Disk storage system. When an FTRP number or an FTRP name is specified, this command displays
balancing information for the specified FTRP and the Flexible Tier Sub Pools (FTSPs) that are registered in this
FTRP. When the FTRP number or the FTRP name is omitted, this command displays the balancing information
of all the FTRPs that are registered in the ETERNUS DX Disk storage system.
■
Syntax
show balancing-flexible-tier-pools [-ftrp-number
■
Parameter
-ftrp-number
or
-ftrp-name
■
Output
When the parameter is omitted
# Flexible Tier Pool
# No. Name
#
0 FTRP_NAME#0
#
1 FTRP_NAME#1
#
2 FTRP_NAME#2
A
B
A:
FTRP number
B:
FTRP name
C:
Balancing level (High/Medium/Low/-) of each FTRP
(A hyphen (-) is displayed when an Not Ready error or a Subsystem Down error occurs in the ETERNUS DX Disk
storage system)
D:
Balancing status (Active/Error/-) for the FTRP
(A hyphen (-) is displayed when balancing is not being performed)
E:
Balancing progress for the FTRP
(A hyphen (-) is displayed when balancing is not being performed)
F:
Error code of an FTRP balancing process status error
(0x00 is displayed when no error occurs during balancing and a hyphen (-) is displayed when balancing is not
being performed)
Optional. This parameter specifies which FTRP to display the balancing information for. Only
one FTRP can be specified at the same time. If omitted, the balancing information of all the
FTRPs that are registered in the ETERNUS DX Disk storage system is displayed.
For details, refer to
"1.2.6 Flexible Tier Pool Syntax" (page
Balancing Balancing Process
Level
Status Progress(%) code
High
-
Medium
Active
Low
Error
C
D
ETERNUS CLI User's Guide
Copyright 2015 FUJITSU LIMITED
ftrp_number
| -ftrp-name
Error
- -
50 0x00
30 0x73
E F
109
ftrp_name
]
21).
P2X0-1030-09ENZ0