Sony MCC-3000MT Instructions For Use Manual page 39

Setting the Setup menus
1
Turn the SEL/SET knob to display the
setup menu you want to configure.
The display in the first row of the front panel
display changes.
2
Press the SEL/SET knob.
The menu items for the selected setup menu
appear in the second row of the front panel
display.
• To go back to the previous level, press the
CANCEL button.
3
Turn the SEL/SET knob to select the
menu item you want to configure, and
then press the knob.
The submenu items for the selected menu
item appear in the third row of the front panel
display.
• To go back to the previous level, press the
CANCEL button.
If you selected a menu item for which only
on/off settings exist and there are no
subitems, proceed to step
4
For menu items with subitems, turn the
SEL/SET knob to select the menu item
you want to configure, and then press
the knob to confirm it.
5
.
• For menu items with a wide range of values
(ex: –99 to +99), the cursor at the end of the
entered value will flash to indicate that it
can be modified.
5
Select the desired value by turning the
SEL/SET knob to make the setting.
The setting is changed, and the new setting is
displayed.
When you select "Execute" for an execution
item, the corresponding function is executed.
Terminating the menu operation
Press the MENU button.
When you press the MENU button again,
DISPLAY returns to normal display.
Basic Menu Operations 39