Resetting A Picture Profile; Renaming A Picture Profile Name - Sony MCC-3000MT Instructions For Use Manual

2
Press the PICTURE PROFILE button.
The Picture Profile menu appears.
3
Select "Copy" from the Picture Profile
menu.
The name of the copy destination picture
profile is displayed in the front panel display.
To change the name of copy destination
picture profile, turn the SEL/SET knob.
4
Display the copy destination picture
profile, and press the SEL/SET knob.
Copying begins.
When copying ends, a completion message
appears for 3 seconds before the screen returns to
its original display.

Resetting a picture profile

You can reset a selected picture profile to the
factory settings (standard status).
1
Refer to the procedure in "Registering
and recalling picture profiles" (page 32)
and select the source picture profile.
2
Press the PICTURE PROFILE button.
The Picture Profile menu appears.
3
Select "Reset" from the Picture Profile
menu.
"Execute" and "Cancel" are displayed.
4
Select "Execute."
Resetting begins.
When resetting ends, a completion message
appears for 3 seconds before the screen returns to
its original display.

Renaming a picture profile name

You can rename registered picture profiles (see
page 34).
1
Refer to the procedure in "Registering
and recalling picture profiles" (page
32), and select the picture profile you
want to rename.
2
Press the PICTURE PROFILE button.
The Picture Profile menu appears.
3
Press the SEL/SET knob.
The cursor for the text entry position flashes.
4
Turn the SEL/SET knob to select a
character, and press the knob to
confirm it.
The cursor moves to the next space.
5
Perform text entry in the same way
until the final space, and then press the
SEL/SET knob.
Text entry is complete.
Picture Profiles 33