Toshiba 2460 Service Handbook page 36

c) Secondary scanning reproduction ratio
(1) Confirm that the value of the cutting volume of the scanner leading image edge (code 313) is
128 (default value).
0 5
3
PWR
(2) Place the scale (horizontal to the copy movement direction) and make an A3 100% copy.
(3) Compare the copy and the scale.
(4) In order to adjust the divisions of the scale, do as follows.
0 5 3
PWR
Notes 1. An increase in the value corresponds to an increase in the division of scale (0.1522
%/step).
2. In order to make a test copy, make sure the message indicates [ 100 %
after the INT key is pressed.
3. Adjustment value is able to be input within the range of 0 ~ 255.
The default adjustment value is 128.
September 1997 © TOSHIBA CORP.
1 3 START
Copy movement direction
Copied Scale
Actual Scale
0 4 START
1 - 33
In case the value is "128".
In case that the value is not
"128", input "128" with the
digital keys
Set the value
INT
INT
PWR OFF
E/S
(Test copy)
A ]
2460 ADJUSTMENT