Husqvarna DXR300 Operator's Manual page 40

After the first 100 hours
Change
After the first 100 hours the following maintenance should be carried out, subsequently every 1,000 hours.
Oil gearbox slew motor
Oil gearbox drive motor
250 hours service
Carry out the weekly service as per the service schedule before you perform the 250 hours service.
Mountings
Drive motor
Slew motor
Gear ring
Level check
Slew motor
Drive motor
Function
Drive motor
Slew motor
Gear ring
Miscellaneous
Hydraulic pump – checking of unusual sounds
Hydraulic hammer – checking of bushing and wrecking bar
500 hours service
Carry out the 250 hours service as per the service schedule before you perform the 500 hours service.
Change
Hydraulic fluid
Oil filter
Air filter
1,000 hours service
Carry out the 500 hours service as per the service schedule before you perform the 1,000 hours service.
Change
Oil gearbox slew motor
Oil gearbox drive motor
40 –
English
MAINTENANCE AND SERVICE
Contact your service agent.
Contact your service agent.
Contact your service agent.
Contact your service agent.