2
Turn on the peripheral devices.
To turn on/off the camera using the
infrared remote commander
As long as the camera is connected to an AC
outlet, you can turn the camera on or off with
the POWER switch on the infrared remote
commander.
When you turn the power off using the
infrared remote commander, the POWER
lamp turns off and the STANDBY lamp
lights on the camera.
POWER
The STANDBY
lamp lights.
Pan/Tilt and Zoom
Operation
Panning and Tilting
1
Press the POWER switch.
The camera will turn on and perform the
pan/tilt reset operation automatically.
2
Press the arrow button to pan or tilt the
camera.
While checking the picture on the
screen, press the desired arrow button.
To move the camera little by little,
press the button just for a moment.
To move the camera in a wide range,
press and hold the button.
To move the camera diagonally, press
the B or b button while holding down
the V or v button.
To face the camera back to the front
Press the HOME button.
If the camera moves in a different
direction from the one you intended
The camera is preset so that the image output
from the camera is rotated toward the right
whenever you press the b button.
Pan/Tilt and Zoom Operation
23