Port Monitor Commands
remote-span
remote-span
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# no monitor session all
To enable remote SPAN, use the remote-span VLAN Configuration mode
command.
To disable remote SPAN, use the no form of this command.
Syntax
remote-span
no remote-span
Parameters
N/A
Command Mode
VLAN Configuration mode
Example
The following example defines VLAN 2 as a RSPAN VLAN:
switchxxxxxx(config)# vlan 2
switchxxxxxx(config-vlan)# remote-span
27
377