Power over Ethernet (PoE) Commands
show env all
show env all
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
The default threshold is 95 percent.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# power inline usage-threshold 90
To show the environment temperature, the temperature thresholds, and the fan
speeds, use the show env all Privileged EXEC mode command.
Syntax
show env all
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxx# show env all
Fan
Status
Speed (RPM)
---- -------- ----------------
1
Normal
4850
2
Normal
4950
3
Normal
4500
4
Normal
4400
Thermal
State
Temperature
(Degree Celsius) (Degree Celsius) (Degree Celsius)
Yellow Threshold Red Threshold
25
363