Set Default Gateway; If Webmin Stops Responding - Toshiba IP edge EP Installation Manual

NETWORK CONFIGURATION

Set Default Gateway

Installation Manual August, 2011
6. Enter the IP address, Netmask, and Broadcast address.
7. Click to set MTU to Default.
Note: The following steps must be completed as shown. Do not click on
Save and Apply or Apply Configuration. If Webmin stops
responding go to
4 –-6.
8. Click on Save (do not click on Save and Apply).
9. Close the Webmin window.
10. Login to Enterprise Manager using the static IP address you just
assigned.
11. Select Application > Webmin.
12. Select Networking > Network Configuration. Click on the Routing
and Gateways icon.
13. Select the Boot time configuration tab.
14. For bond0 enter the IPedge server gateway server address.
15. For Use as router select No.
16. Click on the Save button.
17. Select Hostname and DNS Client.
123.45.67.89
123.45.67.189
192.168.254.250
255.255.255.0
192.168.254.xxx

"If Webmin Stops Responding"

na.mycompany-dpg.local
Set Default Gateway
on page Chapter
4-5