Chapter 2 – IPedge Hardware
POWER REQUIREMENTS
IPedge SERVERS
Figure 2-1 IPedge Server Hardware - Front View
Installation Manual
August, 2011
Toshiba recommends an uninterruptible power supply (UPS) for the
IPedge server. A UPS is the preferred power source since it provides
automatic switch-over to 120 VAC back-up in case of a loss of power. The
specific input voltage and current requirements for each server is listed
the specifications for each model.
The IPedge hardware platform is available in three configurations.
•
IPedge EC serving up to 200 users
•
IPedge EM serving up to 1000 users
•
IPedge EP serving up to 40 users.
The EC and EM servers are both 1U rackmount chassis. The EP server
can be set on a shelf horizontally or vertically, using the optional base.
The 2U high EP chassis can be installed in a 19 inch rack using the
optional rackmount shelf adapter. Refer to
EC Server - Up to 200 users
EM Server - Up to 1000 users
EP Server - Up to 40 users
Figure
2-1.
2-1