Ir Remote Control - ABB Busch-ComfortTouch 9 Operating Instructions Manual

Operating Instructions
Busch-ComfortTouch
5.3.21

IR remote control

The Busch-ComfortTouch
of the Busch-ComfortTouch
predefined in the Busch-ComfortTouch
Programming of a new IR remote control is also possible on the device later.
1. Press the "IR remote control" icon in the navigation bar to access the function.
The functions suitable for the IR remote control are described on the left.
2. Press an entry in the list and then "Teach in" to assign this function to the remote control.
A time of 5 seconds runs down.
3. During this time press a button on the remote control to assign the respective function to this button. To do
this, point the remote control towards the Busch-ComfortTouch
appears in "Assigned".
4.Select an entry from the list.
The assignment can also be deleted at any time.
5. The press "Reset".
When this process is successful, the tick is removed from "Assigned".
Operating Instructions | 1473-1-8041
®
®
can be controlled via an RC5 or B&O capable remote control. To do this, the functions
®
are programmed to an IR remote control. For this the available IR functions are
®
by the electrical installer with the aid of the project planning software.
®
. When this process is successful, a tick
Operation
— 67 —