ABB Busch-ComfortTouch 9 Operating Instructions Manual page 22

Operating Instructions
Busch-ComfortTouch
Control element Status
Sequences Scene can be called up:
(Process with
influence from the
user)
Sequence is running (animation on left push-
button)
The sequence was stopped and can be
started again with the right push-button (start
from the position it was stopped (see right
push-button)).
Operating Instructions | 1473-1-8041
®
Function
The "Sequences" control element has a push-button on the left and
the right. On the left the user can start or stop a sequence. The left
button is used to start or pause a sequence. The right button is
used to pause and to restart a sequence (the process continuous
from the point it was stopped).
Changes to the sequence are indicated by an icon and can be
stored. This is done with a long press of the left push-button. A
progress bar is displayed. An icon is displayed after the successful
storage.
Note
The sequence to be called up must be assigned appropriately in
the project planning software of the Busch-ComfortTouch
contact your electrical installer who will set up the Busch-
ComfortTouch
®
for you individually and according to your wishes.
Operation
®
. Please
— 22 —