ABB Busch-ComfortTouch 9 Operating Instructions Manual page 24

Operating Instructions
Busch-ComfortTouch
Value display elements / value sending elements (basic versions, which can be adapted further)
- With value display elements, values are displayed as text or graphical information in a page of the Busch-
®
ComfortTouch . They are not operable, but are used to display values only.
- With value sending elements, you can display values in different formats in a Busch-ComfortTouch
and send them to other devices.
Control element Status
Text display element
Graphic display
element
Value sending element
Operating Instructions | 1473-1-8041
®
Function
The "Text display" version can display values and texts that
are sent, for instance, from a temperature sensor.
There are no direct control elements here!
The "Graphics display" version can display values
graphically, which are sent from a temperature sensor, for
example. The values are also displayed as a number. For
the graphic display element you can choose between a
wind rose and a dial-type gauge. This must have been
appropriately assigned in the project planning softwar of the
®
Busch-ComfortTouch . Please contact your electrical
installer who will set up the Busch-ComfortTouch
individually and according to your wishes.
There are no direct control elements here!
With value sending elements, you can display values in
different formats (see above) in a Busch-ComfortTouch
page and send them to other devices.
There are no direct control elements here!
Operation
®
page
®
for you
®
— 24 —