NEC Express5800 series User Manual page 117

7.
Press S when the following message appears:
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage devices.
Select [Other] and press Enter.
8.
Insert Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER into the floppy
disk drive and press Enter.
manufacturer-supplied hardware support disk
9.
Select the [Adaptec Ultra320 SCSI Cards (WinXP/Server 2003 IA-32)] and press Enter.
Then, it returns to the screen of step 7.
10.
If the optional board is installed, select the proper SCSI Adapter and press Enter.
– Adaptec HostRAID U320 Driver Ver 1.02 For Windows 2000/XP/2003 (When onboard
Adaptec HostRAID controller is used.)
– Emulex LP1050 PCI-Fibre Channel HBA (When Fibre Channel controller
(N8403-015) is used.)
Then continue the proper jobs depending on the messages. Refer to the "First Step Guide" for
details of the installation.
[Procedure for License Authentication]
Product Key used in the procedure for the license authentication should be matched with the COA
label in which the product key contained in Windows Server 2003 is written.
NOTES:
Execute the activation within 30 days.
The System will be locked after 30 days have passed.
COA label may be attached to the main unit.
Please insert the disk labeled
into Drive A:
* Press ENTER when ready.
Installing the Operating System 5-7