Samsung RF23HSESBSR User Manual page 10

When moving your refrigerator
CAUTION
To prevent floor damage, be sure the front
adjusting legs are in the up position (above the
floor). Refer to "Leveling the refrigerator" in the
manual on page 15.
Flat-blade screw Control Lever
driver (-)
FLOORING
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support
a fully loaded refrigerator.
To protect the finish of the flooring, cut a large
section of the cardboard carton and place it under
the refrigerator where you are working.
When moving the refrigerator, you need to pull
and push it straight forwards or back.
Do not wiggle it from side to side.
DA68-03022A-05.indb 10
ACCESSORIES AND
REQUIRED TOOLS
The following accessory is included with your
refrigerator:
Fastener
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
screwdriver (+) screw driver (-)
Pliers
English - 10
Flat-blade Socket wrench
3/8'' (10 mm)
Allen wrench
(3/16") (5 mm)
2015. 2. 11. 9:34