HP 9000 User Manual page 76

Installing a Language Definition Table
Before you install a language definition table, you need to determine
locale_name and locale_id. If you want to create a new locale, these must not
conflict with existing locales and the locale_id must be in the range 901-999.
After you have changed new_locale, you can install it in the system by
executing:
localedef -i new_locale
You may need to be root to do this or you can deliver new_locale to your
system administrator for installation.
To verify correct installation of the new locale:
• Run nlsinfo to see that the new locale is displayed.
• Examine /usr/lib/nls/config to see that locale_name is listed with
locale_id.
• Verify that a directory /usr/lib/nls/ locale_name exists.
• Verify that a file /usr/lib/nls/ locale_name/locale. inf exists.
• Set LANG to the locale_name locale and verify that date formats the date as
desired.
Localizing International Software 5-27
5