Table of Contents
Advertisement
F04: LENS FILE 1 LENS FILE RECALL
LENS FILE STORE
F. ID
LENS NO OFFSET
IRIS GAIN
LENS RECALL/
1/2/3/4/5
LENS STORE
(sub pages of
F. ID
F04: LENS FILE
1)
F05: LENS FILE 2 LENS M VMOD
LENS R FLARE
LENS G FLARE
LENS B FLARE
F06: LENS FILE 3 SHADING CH SEL
LENS H SAW
LENS H PARA
LENS V SAW
LENS V PARA
DIAGNOSIS Menu
Pages
Items
D01: HOURS METER OPERATION (H)
FAN (H)
D02: DEV STATUS
FRAM
EEPROM VA
LSI
FILTER SERVO
(displayed only with
HKC-SV1 attached)
OPTICAL MODULE
(displayed for HDC-
X310/X310K only)
1) If the filter is kept rotated continuously, it may be regarded as an
abnormal operation and "ERROR" may be displayed. The "ERROR"
indication is maintained until the camera is turned off.
Note
If NG appears, consult your Sony service personnel.
EXEC
EXEC
character string
EXEC
[0]
(–99 to
to +99)
character string
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[R]
/G/B
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
[0]
(–99 to
to +99)
Functions
Displays the accumulated value of powered time of the camera.
Displays the accumulated operation time of the fan.
AT
Display the conditions inside the camera.
DPR
PA
HT
BCS
Displays the status of the Filter Servo Unit.
Displays the conditions of the optical transmission module.
TxLD: Condition of the laser diode for transmission from the camera
Rx LEVEL: Level status of the optical reception of the camera side
Rx ERROR: Error status of optical reception data error of the camera side
To move to the LENS RECALL page for
calling a stored lens file
To move to the LENS STORE page for storing
the current setting in a lens file
Displays the ID (max.16 characters) of the
lens file being selected (can be changed).
To clear the contents of the lens file
Displays the iris gain value of the selected
lens file.
To select a lens file of the corresponding
number
To specify the ID (max.16 characters) of the
lens file
To adjust the master V modulation shading of
the lens file
To adjust the R flare level of the lens file
To adjust the G flare level of the lens file
To adjust the B flare level of the lens file
To select the channel to be adjusted on this
page (The four items below can be set
independently.)
To adjust H Saw white shading compensation
of the lens file
To adjust H Parabola white shading
compensation of the lens file
To adjust V Saw white shading compensation
of the lens file
To adjust V Parabola white shading
compensation of the lens file
1)
S R A
39
Menu Operations
- Quick Links:
- Ac Adaptor (Supplied)
Hide quick links:
Advertisement
Table of Contents
