Removing The Tally Unit - Sony HDC-X300 Operation Manual

To remove the lens
Note
To remove the lens, first place the camera on a stable
surface to prevent the lens from dropping.
1
Detach the rubber lens mount stopper.
2
While holding the lens, turn the lens mount lever
counterclockwise until it stops.
Rubber lens mount stopper
3
Remove the lens.
22
Installation
/W HI TE
R UP
4 EN TE
ME NU
r H A D
P o w e
IN IT IO
D E F
H IG H
3
/W HI TE
1
R UP
EN TE
ME NU
r H A D
P o w e
2
N V ID
IN IT IO
D E F
H IG H
Lens mount lever
When transporting or storing the camera without
attaching the lens
Attach the mount cap and secure it by turning the lens
mount lever clockwise.
Then return the rubber lens mount stopper to its original
K
BL AC
DO W N/
position.
H D
R A
A M E
E O C
N V ID

Removing the Tally Unit

The tally unit can be removed, depending on purposes of
use.
To remove
1
Disconnect the tally cable from the TALLY connector
on the front panel.
K
BL AC
DO W N/
2
Loosen the four screws on the bottom.
H D
R A
A M E
E O C
Bottom of the camera (tally unit)
3
Pull out the camera body by sliding it.
/W
R UP
EN TE
ME NU
H D
r
P o w e
IN IT IO
D E F
H IG H
K
BL AC
DO W N/
/W HI TE
R UP
EN TE
ME NU
H D
r H A D
R A
P o w e A M E
E O C
N V ID
IN IT IO
D E F
H IG H