Menu Items; Operation Menu - Sony HDC-X300 Operation Manual

Menu Items

When the setting range in the Settings column is enclosed
by parentheses ( ), the setup value is a relative value. The
indication 0 means that the item is set at the preset value
stored in the ALL file (see page 38).

OPERATION Menu

Pages Items
01: FUNCTION 1 OUTPUT
MASTER GAIN
WHITE BAL
SHUTTER MODE
SHUTTER [s]
ECS [Hz]
The setting range shown on the menu screen may differ
depending on the preset status.
For the indications in the File column, see "FILE Menu"
on page 38.
[ ]
Settings (default in )
[CAM]
BARS/
[0]
–3/ /3/6/9/12/18/24/30/
36/42/48
[A]
PRE/ /B(ATW)
[OFF]
/SHUTTER/ECS/SLS To select the shutter mode:
[1/100]
60I: , 1/125, 1/250,
1/500, 1/1000, 1/2000
[1/40]
30PsF: , 1/60, 1/120,
1/125, 1/250, 1/500,
1/1000, 1/2000
[1/32]
24P: , 1/48, 1/96,
1/125, 1/250, 1/500,
1/1000, 1/2000
[1/60]
50I: , 1/125, 1/250,
1/500, 1/1000, 1/2000
[1/33]
25PsF: , 1/50, 1/100,
1/125, 1/250, 1/500,
1/1000, 1/2000
[60.01]
60I: to 19000
[29.99]
30PsF: to 26000
[23.99]
24P: to 21000
[50.14]
50I: to 29000
[25.02]
25PsF: to 25000
Function
To select the output signal:
BARS: Color bar signal for adjustment
CAM: Video signal being shot
To select the master gain value (dB)
To select the reference value for automatic
white balance adjustment:
PRE: To use the preset value set with the
MAINTENANCE menu
A: To use the value stored in memory cell A
with the PAINT menu
B (ATW): To use the value stored in memory
cell B with the PAINT menu or Auto
Tracing White function (switching
between B and ATW is achieved with
the FUNCTION 3 page of the
MAINTENANCE menu.)
OFF: Normal Shooting mode
SHUTTER: Shutter mode (to obtain clear
images of quickly moving subjects)
ECS: Extended Clear Scan mode (to obtain
images of computer monitors without
horizontal striping)
SLS: Slow Shutter mode (for shooting under
insufficient illumination)
Note
If a lens that does not return the iris value
signal is used, the iris is fixed to the open end
when the IRIS switch of the lens is set to A
(Auto) in SLS (Slow Shutter) mode.
To select the shutter speed (sec.) when you
set SHUTTER MODE to SHUTTER
(The selectable speeds differ among the scan
modes.)
To select the ECS frequency (Hz) when you
set SHUTTER MODE to ECS
(The selectable speeds differ among the scan
modes.)
File
S R
S R
S
S
29
Menu Operations