Yamaha CL5 Reference Manual page 20

In the PATCH/NAME popup window you can view and change the channel name, icon, channel
color, and input port assigned to each input channel.
2 3
1
5
4
6
1
Input port button
Indicates the currently-selected input port. If you press this button when selecting an icon or
changing the channel name, you will return to the input port select screen.
2
Icon button
Indicates the icon that is selected for the corresponding channel. When you press this button, a
screen will appear in which you can select an icon or sample name.
3
Channel name input box
Indicates the name that is assigned to the corresponding channel. When you press this field, a
keyboard window allowing you to assign a name will appear.
4
Category select list
Selects the category of input port shown in the popup window. The categories correspond to the
following input ports. They vary depending on the channel type.
• DANTE1–32 ..............DANTE1–DANTE32
• DANTE33–64 ............DANTE33–DANTE64
• OMNI/PB OUT.........OMNI1–OMNI8, PB OUT(L), PB OUT(R)
• SLOT1 .........................SLOT1(1)–SLOT1(16)
• SLOT2 .........................SLOT2(1)–SLOT2(16)
• SLOT3 .........................SLOT3(1)–SLOT3(16)
• EFFECT RACK......... FX1L(A)–FX8R(B)
• PREMIUM RACK.... PR1L(A)–PR2R(B)
5
Input port select buttons
Assign an input port to the currently-selected input channel.
6
Tabs
Enable you to switch between items.
3.
Access the input port selection screen of the PATCH/NAME popup window, and
then use the input port select tabs and input port select buttons to select an input
port.
NOTE
If PATCH CONFIRMATION is ON, a confirmation dialog box will appear when you attempt to
change the patch settings. If STEAL PATCH CONFIRMATION is ON, a confirmation dialog box
will appear when you attempt to change a location that is already patched elsewhere.
4.
When you have finished making settings, press the "x" symbol located in the upper
right to close the window.
You will return to the OVERVIEW screen.
NOTE
You can also select input ports from the HA/PATCH popup window.
5.
Repeat step 2–4 to assign input ports for other channels.
20
Input and output patching
Reference Manual