Talkback - Yamaha CL5 Reference Manual

3
INPUT TO TALKBACK field
• INPUT TO TALKBACK patch button
.......................... Press the button to open the PORT SELECT popup window, in
which you can patch a desired input port to an input port to
patch to talkback. The selected port name will appear on the
button.
• INPUT GAIN knob.................. Sets the input gain of the selected port.
• Input level meter....................... Indicates the level of signals after the input gain.
4
TALKBACK ASSIGN field
An indicator lights to indicate the currently-selected output destination of the talkback signal.
5
TALKBACK ON button
Switches talkback on or off.
2.
Press the TALKBACK popup display button or the ASSIGN field to open the
TALKBACK popup window.
In this popup window you can make detailed settings for talkback.
3 5 4 6
1
2
0
■ TALKBACK IN field
This field enables you to make settings for the TALKBACK jack on the front panel.
1
+48V button
Switches on or off the phantom power (+48V) supplied to the TALKBACK jack.
2
TALKBACK level meter
Indicates the input level of the mic connected to the TALKBACK jack.
7 8 9
A
■ INPUT TO TALKBACK field
This field enables you to route a signal from a mic (connected to a normal input jack) to talkback.
3
INPUT TO TALKBACK patch button
Press the button to open the PORT SELECT popup window, in which you can select an input port.
4
+48V button
This is an on/off switch for the phantom power (+48V) supplied to the selected input port.
NOTE
This button will not appear if no input port is selected.
5
ANALOG GAIN knob
Indicates the analog gain setting for the selected input port. Press this knob so that you will be able
to use the multifunction knob to adjust the gain.
6
Level meter
Indicates the input level of a mic connected to the selected input port.
7
GC button
Indicates the on/off status of the Gain Compensation (gain correction) function. The button will
appear if the input jack of the I/O rack is patched.
8
Level meter
Indicates the level after Gain Compensation. It will appear if the input jack of the I/O rack is
patched.
9
TALKBACK ON/OFF button
Switches talkback on or off.
■ ASSIGN field
0
Channel select buttons
Enable you to select a channel on which the talkback signal is sent.
A
CLEAR ALL button
Press this button to clear all selections.
3.
Connect a mic to the TALKBACK jack on the front panel, and then rotate the
TALKBACK GAIN knob to adjust the input sensitivity of the mic signal.
The meter in the TALKBACK IN field indicates the input level of the mic connected to the
TALKBACK jack. If you want phantom power (+48V) to be supplied to the TALKBACK jack,
turn on the +48V button located in the TALKBACK IN field.
4.
If you want to use an input jack other than the TALKBACK jack as supplementary
input for talkback, follow the steps below.
4-1. Press the INPUT TO TALKBACK patch button in the INPUT TO TALKBACK field to
open the PORT SELECT popup window.
104
Talkback and Oscillator
Reference Manual