D-Link DES-1228/ME Reference Manual page 194

Example usage:
To show the DHCP relay configuration:
DES-1228/ME:5#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status
DHCP/BOOTP Hops Count Limit
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State
DHCP Relay Agent Information Option 82 Check
DHCP Relay Agent Information Option 82 Policy
DHCP Relay Agent Information Option 82 Remote ID : 00-19-5B-EF-78-B5
Interface Server 1
------------ ---------------
DES-1228/ME:5#
To show a single IP destination of the DHCP relay configuration:
DES-1228/ME:5#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface
---------
System
DES-1228/ME:5#
enable dhcp_relay
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable DHCP relay:
DES-1228/ME:5#enable dhcp_relay
Command: enable dhcp_relay
Success.
DES-1228/ME:5#
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
: Disabled
: 4
Server 2
---------------
Server 1 Server 2
----------- ------------
10.58.44.6
Used to enable the DHCP/BOOTP relay function on the Switch.
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on
the Switch.
None.
Only Administrator level, Operator level or Power User level users can
issue this command.
: Disabled
: Disabled
: Replace
Server 3
---------------
Server 3 Server 4
----------- --------------
190
Server 4
--------------