Final Check; Checking Procedures - Yamaha 2012 TMAX XP500A Service Manual

EAS59C2810
[C-3] FINAL CHECK

Checking procedures

1. Check the brake fluid level in the brake master cylinder reservoir.
Refer to "CHECKING THE BRAKE FLUID LEVEL" on page 3-14.
2. Check the wheel sensor housings and wheel sensors for proper installation.
Refer to "INSTALLING THE FRONT WHEEL (DISCS)" on page 4-24.
3. Perform hydraulic unit operation test 1 or 2.
Refer to "HYDRAULIC UNIT OPERATION TESTS" on page 4-72.
4. Delete the fault codes.
Refer to "[C-1] DELETING THE FAULT CODES" on page 8-115.
5. Checking the ABS warning light.
Ensure that the ABS warning light goes off by walking the vehicle at a speed of faster than 7 km/
h (4.4 mi/h) or performing a trial run.
ABS (ANTI-LOCK BRAKE SYSTEM)
8-117