Device Configuration; Configuration Summary - Toshiba e-STUDIO170F Owner's Manual

- DEVICE CONFIGURATION

Configuration Summary

This facsimile has many user
1
adjustable settings.
Each of these configuration
settings is discussed in detail
throughout the remainder of
Press
this section.
Menu Screen displays.
Use the following procedures to
access one or more of these
configuration settings.
Press
SETTINGS. The Default Set-
tings sub-menu displays.
Press
SETTINGS. The Machine Set-
tings sub-menu will now be dis-
played.
NOTE: Only 1 selection can be
2
Enter the Select the Desired Configuration Setting (01-11)
Configuration Menu
MENU
. The initial
Press
Configuration Setting 01 through 11 from the list below. The detailed configuration procedure for each
setting is shown in parentheses after the configuration setting.
MENU
01. SPEAKER VOLUME - (Page 46) - Sets the Bell Ringer, Alarm Tone, Key Touch Tone and
1.FAX FEATURES
to enter DEFAULT
02. POWER SAVER - (Page 50) - Configures the machine's Super Energy Saver function for Auto-
03. DEPARTMENT CODE - (Page 52) - Enables, Disables* and Configures up to 50 Department
DEFAULT SETTINGS
1.MACHINE SETTINGS
04. ACCOUNT CODE - (Page 56) - Enables or Disables* a 4-digit Account Code entry.
to enter MACHINE
05. LINE MONITOR - (Page 57) - Enables or Disables* a Line Monitor function.
06. RECEIVE INTERVAL - (Page 58) - Sets an interval for the machine to wait (0 - 14 min.) after
07. ECM - (Page 59) - Enables or Disables* an ECM (Error Correction Mode) function.
MACHINE SETTINGS
01.SPEAKER VOLUME
08. SORT COPY - (Page 60) - Enables or Disables* a Sort Copy function.
02.POWER SAVER
09. REDIAL MODE - (Page 61) - Sets the number of redials (0-14) (5*) and redial interval (1min.-
03.DEPARTMENT CODE
04.ACCOUNT CODE
05.LINE MONITOR
10. RECEPTION MODE - (Page 62) - Configures FAX*, FAX/TAD, TEL/FAX or Manual reception
06.RECEIVE INTERVAL
07.ECM
08.SORT COPY
11. COPY REDUCTION - (Page 64) - Configures the machine's Copy Reduction function for Auto or
09.REDIAL MODE
10.RECEPTION MODE
11.COPY REDUCTION
NOTE: * indicates the factory default setting.
displayed at one time.
MENU
or until the desired Configuration Setting is displayed or enter the desired
Monitor volume (8-1) (5*) for the machine. Adjust the volume by checking the sound made in
every setting.
matic/Manual* or Off operation and Printer Power Saver function for On or Off.
Codes.
making four consecutive dialings.
15min.) (1*min.).
modes.
Off* operation.
4 5
4 5