Selecting The Reception Mode; Recording Paper Size - Toshiba e-STUDIO170F Owner's Manual

Selecting the Reception Mode

The Automatic Reception If Auto Receive mode is se-
Mode (AUTO RECEIVE) is nor- lected, press:
mally selected. You can
change the reception mode by
AUTO
pressing the key.
If FAX/TAD mode is selected,
Refer to Reception Mode se- press:
lection on page 62.
Press:
If TEL/FAX mode is selected,
AUTO
press:
RECEPTION MODE
1.FAX
2.FAX/TAD
If Manual Receive mode is se-
lected, press:
3.TEL/FAX
4.MANUAL
104

Recording Paper Size

This facsimile can use A4, Letter and Legal size paper. The received document is recorded (printed)
within the Effective Recording Area of the paper.
Effective
Recording
Area
NOTES:
• If the received document is equal to or shorter than the recording area of the paper, the re-
ceived document is printed at its actual size.
• If the received document is larger than the recording area of the paper, it will be vertically and
horizontally reduced to fit on the recording paper installed. The reception will be divided onto
two sheets if the document needs to be reduced to smaller than 73%* of its original size.
*Reduction standard ratio for every paper
Document
• If you desire to receive large originals without reduction or excessive paper usage, set the
"DISCARD" function to "ON." If the lower part of the original exceeds the recording paper by 13
mm or less, the image will be automatically discarded. This predetermined dimension is a ser-
vice function setting. Contact your Toshiba dealer for setup.
• If the "RX REDUCTION" function is "OFF", the larger original will be recorded on two or more
sheets. The top of the second page will repeat about 5 mm of the lower part of the first page.
Paper Size A B C D
A4 : mm 210 202 289 297
Letter: inches 8.5 8.2 10.7 11.0
Legal: inches 8.5 8.2 13.7 14.0
Recording
Paper