Power Head - Hitachi PV-XA100 Instruction Manual

Maintenance
Protective filter (Washing with water)
1
Remove the protective filter
from the handy cleaner handle.
Protective filter
Note l Do not use cleansers or bleach, and do not wash using a washing machine. Also, do not dry it with
hot air such as that from a hair dryer.
It may cause a deterioration in performance, damage, or deformation.

Power head

l Perform maintenance when suction power is weak or when you are concerned about dirt.
l We recommend periodic maintenance (about once a month).
Dust stuck to the safety switch, rotary brush, brush, wheels, air inlet, and rotating sections may cause
reductions in suction power or malfunctions.
Risk of injury.
CAUTION
l Detach from the stick cleaner when performing maintenance.
Remove tangled dust
Remove tangled dust using tweezers, etc.
Rotating sections
Air inlet
Risk of damage to the floor.
l If dust gets tangled in the wheels, the wheels cannot rotate, which may cause wear and tear
CAUTION
and floor damage.
l If the brushes, wheels, or rotary brushes are worn out, please consult with the dealer as soon
as possible. (We recommend replacing the brushes, wheels, and rotary brush simultaneously)
Note
l Do not subject the safety switch to excessive force. Doing so may cause damage.
E-18
Handy cleaner
Wheels
Brushes
Rotary brush
2
Gently press and wash with water.
l Tap to remove excess water and air dry it for
approx. 12 hours. (The drying time varies
depending on the environment.)
l After it dries, attach it to the handy cleaner handle.
Tweezers
Safety switch
Brushes
Protective filter