Hitachi PV-XA100 Instruction Manual page 17

Sponge filter (Washing with water), clean filter
1
Remove the sponge filter from the
clean filter.
2
Gently press and wash with water.
After washing, remove excess water and air dry it for
approx. 12 hours. (The drying time varies depending on
the environment.)
3
Remove the dust stuck deep in the folds of the clean filter.
Put the clean filter into a trash bag and gently tap it against
the floor approx. 5 times to remove the dust stuck inside.
Risk of malfunction.
l Do not wash the clean filter with water.
l Do not scrub the clean filter with a brush, etc.
Risk of damage.
l If there a risk of damaging the floor, lay
something thick first, such as a newspaper.
4
Attach the clean filter.
Attach the sponge filter to the clean filter.
Adjust the r marks of the cyclone chamber
and clean filter and firmly press all the way.
Note
l When attaching the clean filter, adjust the
and firmly press all the way.
5
Attach the cyclone chamber to the dust case.
Attach in the reverse order of removal.
CAUTION
Sponge filter
Gently tap
Trash bag
against the
floor.
Sponge filter
Cyclone chamber Clean filter
r
marks of the cyclone chamber and clean filter
Dust case
Clean filter
Sponge filter
Face the
side with
the dust
downward.
r mark
Adjust the r marks.
Cyclone chamber
E-17