Silvercrest URC 101 DT Operation And Safety Notes page 48

Choose the
buttons (13)
Press OK (12)
= 1,2,3,4 (input)).
Press OK (12)
command should be carried out
The hour will flash. Input the hour using the navigation
buttons (13)
The minutes will flash. Input the minutes using the
navigation buttons (13)
When
commands will start.
First select the source button (2) of the device on
which the command should be carried out.
In our example:
programmed to this button.
Press OK (12)
shown:
command.
In our example: Select the channel using the number
buttons 0-9 (3).
When no more entries are required, press OK (12)
46
(X = 1,2,3,4).
. The display will show
. The time will be shown when the
.(X=1,2,3,4)
and press OK (12)
is displayed (X = 1,2,3,4) the input of
if the DVD Recorder is
. The first input request will be
(X = 1,2,3,4) (Y=1). Enter the first
menu with the navigation
and press OK (12)
(X
.
.
.