Reset - Factory Settings - Silvercrest URC 101 DT Operation And Safety Notes

Hold down the setup (17) button
seconds until
Press the setup button (17)
up
Confirm with OK (12)
Select
and confirm with OK (12)
The current set time for the duration of the backlight
(factory setting - 10 seconds) will flash. Choose the
desired duration in five second intervals using the
navigation buttons (13)
To turn off the backlight choose "00" seconds. Confirm
with OK (12)
The confirmation message
the display reverts back to

RESET - factory settings

On a reset all the device settings will revert back to the
factory settings. The programmed codes, learn functions
and macros will be deleted.
40
.
.
using the navigation buttons (13)
.
is shown.
once more to bring
. The display will show
.
.
.
for about 3
will appear and