Maintenance - Miele Built-in coffee machine Operating And Installation Instructions

Cleaning and care

Maintenance

After approx. 15,000 coffee capsules,
the capsule hopper in the brew unit
must be replaced. A new capsule
hopper can be purchased from Miele.
^ Touch y.
^ Touch the OK sensor.
The capsule hopper is lowered inside
the appliance and the message
"Remove capsule plate and change the
capsule hopper" appears in the display.
^ Open the appliance door.
^ Pull the capsule hopper out.
,
Danger of injury!
Do not reach into the openings in
the brew unit.
^ Pull the rubber connector downwards
to remove.
54
^ Using the special tool (supplied) as
shown above, push it up into the
brew unit a and turn the capsule
hopper b clockwise to remove it.
^ Screw the new capsule hopper anti-
clockwise into position in the brew
unit, as shown above. The spring with
the ball in the capsule hopper must
be placed so that the ball is at the
top.
^ Put the rubber connector back on
from below.
^ Insert the capsule plate and close the
appliance door.